Research on the Reform Practice of New Engineering Course Group Construction

Shan Lan; Xia Han; Tianxiang Liu; Baoyu Li; Zhanbin Guo; Minghui Guo; Suliang Li

doi:10.70088/jjwa3068

Authors

Shan Lan Heilongjiang Bayi Agricultural University, Daqing, China Author
Xia Han Heilongjiang Bayi Agricultural University, Daqing, China Author
Tianxiang Liu Heilongjiang Bayi Agricultural University, Daqing, China Author
Baoyu Li Heilongjiang Bayi Agricultural University, Daqing, China Author
Zhanbin Guo Heilongjiang Bayi Agricultural University, Daqing, China Author
Minghui Guo Nanyang Normal University, Nanyang, China Author
Suliang Li Heilongjiang Duowei Shikong Freedom Manufacturing Co., Ltd., Daqing, China Author

DOI:

https://doi.org/10.70088/jjwa3068

Keywords:

emerging engineering education, curriculum group, interdisciplinary teaching, physical assessment

Abstract

In response to the practical problems in the traditional teaching of industrial design majors, such as the fragmentation of the knowledge chain, the disconnection between theory and practice, and the gap between course teaching and industrial needs, this paper carries out a curriculum group teaching reform targeting four core courses: Product Design Materials and Technology, Product Structure Design, Mechanical Design Fundamentals, and Electrical and Electronic Technology. Relying on a school-enterprise and inter-school collaborative education model, engineering-oriented teaching projects are integrated, and a three-in-one teaching mode of "knowledge chain connection–dual-line classroom collaboration–physical verification closed loop" is constructed. The results of the reform practice show that this mode can break down the interdisciplinary knowledge barriers among material, structure, mechanism, and electronics, effectively make up for students' shortcomings in engineering physical implementation capability, and provide a low-cost, replicable practical approach for local provincial engineering universities to carry out interdisciplinary curriculum construction.

References

B. Zhao and X. Song, "Construction of the 'Integration and Innovation' Engineering Education Concept under the Background of Emerging Engineering Education Construction," Shandong Education (Higher Education), no. Z1, pp. 84–86, 2019.

Y. Peng, J. He, K. Sun, et al., "Exploration on the Training Mode of Basic Science Talents Oriented to Emerging Engineering Education," Innovation and Entrepreneurship Education, vol. 10, no. 1, pp. 73–76, 2019.

Ministry of Education of the People's Republic of China, Guidelines for Emerging Engineering Education Research and Practice Projects, Mar. 3, 2020. [Online]. Available: http://www.moe.gov.cn/srcsite/A08/s7056/202003/t20200313_430668.html. Accessed: Dec. 12, 2021.

Z. Liu, W. Sun, C. Wang, et al., "Exploration on the Innovation Path of Collaborative Training Mode for College Students under the Background of Emerging Engineering Education," China Modern Educational Equipment, no. 19, pp. 117–120, 2026, doi: 10.13492/j.cnki.cmee.2026.19.022.

X. Li, Y. Zhang, S. Fang, et al., "Construction and Practice of the Collaborative Education Mode for Emerging Engineering Education of 'Industrial Demand – University Training – Student Development'," Internet of Technologies, vol. 16, no. 20, pp. 154–158, 2026, doi: 10.16667/j.issn.2095-1302.2026.20.035.

Y. Tian, J. Shao, X. Shen, et al., "Exploration on the Innovation and Entrepreneurship Education Mode of Emerging Engineering Postgraduates Supported by New Quality Productivity Driven by the Integration of Production and Education," Modern Vocational Education, no. 29, pp. 9–12, 2026.

C. Li, Y. Zhang, H. Cao, et al., "Research and Practice on the Training System of Emerging Engineering Talents for Intelligent Manufacturing Oriented to Industry 5.0," Higher Architectural Education, vol. 35, no. 5, pp. 56–63, 2026.

X. Zhang, Y. Zhao, G. Shi, et al., "Teaching Reform of Emerging Engineering Courses Integrated with OBE-BOPPPS-AI — Taking the Course Introduction to Intelligent Manufacturing of Industrial Engineering Major as an Example," Journal of Higher Education, vol. 12, no. 28, pp. 50–54+59, 2026, doi: 10.19980/j.CN23-1593/G4.2026.28.011.

P. Zhang, L. Qi, J. Lü, et al., "Teaching Innovation and Practice of Emerging Engineering Professional Courses with 'Three Tutors, Four Dimensions, Five Senses Resonance' — Taking the Course Dust Removal Technology as an Example," Journal of Higher Education, vol. 12, no. 28, pp. 84–87, 2026, doi: 10.19980/j.CN23-1593/G4.2026.28.018.

J. Liu, T. Dai, and Z. Liu, "Goal Reconstruction and Path Innovation of Pedagogy Practice Courses under the Guidance of OBE," China Metallurgical Education, no. 5, pp. 56–58+62, 2026, doi: 10.16312/j.cnki.cn11-3775/g4.2026.05.024.

R. Liu, Y. Bai, and S. Hu, "Exploration and Practice of Constructing Mechanical Engineering Professional Course Group Based on Core Competence," Journal of Higher Education, vol. 12, no. 27, pp. 106–109, 2026, doi: 10.19980/j.CN23-1593/G4.2026.27.024.

Q. Wang, X. Lin, and C. Dong, "Research on Reconstruction of Mechanical Basic Course Group under the Integration Concept of OBE-NEET," Journal of Higher Education, vol. 12, no. 26, pp. 102–106, 2026, doi: 10.19980/j.CN23-1593/G4.2026.26.022.

M. Zhu and W. Yang, "Practical Research on the Basic Course of Artificial Intelligence Application in Vocational Colleges under the Background of Production-Education Integration," Theory and Practice of Innovation and Entrepreneurship, no. 916, pp. 27–29, 2026.

W. Zhang, W. Han, G. Zhong, et al., "Research on the Reform Path of Innovation and Entrepreneurship Education for Industrial Design Major Driven by AIGC Technology," Theory and Practice of Innovation and Entrepreneurship, vol. 9, no. 16, pp. 67–69, 2026.

P. Li, "What Makes Engineering Discipline 'Emerging'," Research in Higher Education of Engineering, no. 4, pp. 1–4+15, 2017.